will all my Jellyfin traffic go through the VPS

Yes

and count as bandwidth used?

Yes, twice (download from home to the server, and upload from the server to the client)

I do the same thing - I have a 3TB limit, but usually only use 300GB, sharing Jellyfin to a dozen or so users.

Edit: I’m sure there are plenty of good VPS providers out there, I personally have been using NerdRack for a few years now (got a VPS on special and the rate is locked as long as I keep it). Looks like they’ll do $11/year right now for a KVM VPS that’s sufficient.

Ostensibly, that’s because the app wants Bluetooth and/or WiFi access so it can connect to the printer. Because you can use WiFi and Bluetooth to determine location (based on large crowd sourced databases of these data points that have been geolocated), the OS has to ask for location permission as well, even if you just need to see WiFi and Bluetooth.

That being said, once they have this permission, I have 0 doubt they log the actual location as well…

Mozilla used to run a free service for this, and collected that data in the background using mobile Firefox. A replacement is https://beacondb.net/, which is still building enough location data to become useful. Services like this aren’t nefarious, they’re actually really important in getting a quick GPS lock on mobile. Phone hardware actually have pretty poor GPS receivers, but if you can determine an approximate location prior, you get much better results, especially once supplemented with inertial measurements and snapping to mapped roads.

I’ve found great success using a hardened ssh config with a limited set of supported Cyphers/MACs/KexAlgorithms. Nothing ever gets far enough to even trigger fail2ban. Then of course it’s key only login from there.

yeah my product is awful but have you seen the other guy

Yeah, it’s this. I worked at Epic somewhat recently, and I’ve since worked with former Cerner/Oracle folks too. To Epic’s credit, they’ve never been acquired, and are better for it.

There’s a lot of vocational awe across the board, people genuinely trying their best to make the product good. But healthcare is inherently complicated, because people are complicated. Each individual health system needs it customized to their specific needs, and over time this can get hairy to support. Add on to that that regulations and guidelines literally change every year, and it can become really hard to make headway on more meaningful changes when you’re just trying to stay compliant.

This leads to burnout on the software support side, Epic churns through new hires like crazy - average tenure has been way down since COVID-19 (you can Google their response to that), so it’s a revolving door of 21-25 year olds keeping that ship afloat.

Also, yes, insurance companies are the ones making the big money, by a mile.

Agree with others, Vaultwarden is probably your best bet. I’ve found the default app to be a little flaky, but ended up using Keyguard, which I’ve found really good.

I used to use Keypass+Syncthing, but found sync conflicts too often (due to Syncthing support for Android), hence the switch.

Completely aside from what he was doing in Russia, he gives me the same vibe as Ché Cook from The OC.

Anything USB connected more likely to be flaky, but a good enterprise disk shelf and a HBA card would be rock solid (just noisy…)

Unfortunately my solution when I did a big data migration was to buy more (cheap) storage lol. Ultimately it was a cost vs. time/stress tradeoff.

Physical space is actually a huge issue

Ah then I’d recommend keep the existing machine as the server (it sounds like it’s serving you well hardware wise), and get a SFF machine for regular desktop use, be that a new build or a used office machine. The trick will be in migrating the server to Linux, and without endangering your data in the process.

In short, I’d recommend option B/C, where you buy used enterprise grade equipment, learn to run Linux, and build out that way. I can’t overstate just how good a deal can be had on eBay, even from reputable sellers. This goes for everything, from the computer itself, to disk shelves, to HDDs and SSDs. Plus you’re reducing on e-waste! Used HDDs are a great deal if you buy enough to run redundancy (RAID 6 or equivalent), because the seller will often include a warranty (up to 5 years!). I’ve only had a handful of drive failures and 0 issues with warranty refund/exchanges.

You’re running roughly the same services as I do (though a bit more storage), so if it means anything, I’ve ended up using the following (all purchased used)

Broadly, I find the following with my setup:

• Pros
  • Easily expandable storage using a HBA
  • High reliability (ECC memory, server grade equipment)
  • Used equipment is cheap
• Cons
  • Running mostly older-gen hardware, not cutting edge performance
  • Bulky, noisy cooling, less power efficient

A few things that might help narrow options down:

• What’s your budget?
• Do you expect to host more stuff in the future? Do you need more RAM/CPU performance?
• How much physical space do you have? Do you have a place where could store equipment if it were noisier?
• How expensive is your electricity? Is efficiency important?
• How much of your 100TB is full?

Oof, my bad! Thanks for tracking that down.

Absolutely, it’s a fabulous engineering challenge, to make it work well on a hobbyist grade 3D printer with ordinary materials. Also a lesson in using the right tool for the right job (some parts are just better off milled or bought OtS)

I used to frequent the FOSSCAD IRC ages back as a teen. This started during the post-Liberator panic, there were talks about regulating 3D printers to not allow printing guns, etc. Designed a few things, never actually printed any of it myself, but some others did. Really got me into engineering before I exited the scene, led to actually pursuing an engineering career. Was surprised to see 3D printed gun videos so openly shared, it was pretty underground for ages there.