tangeli

It’s not a problem. Tariffs are brining in twice that every month, according to Trump. He can bail them out and subsidise them and still have plenty left over. Because that’s how free market capitalism works: with government subsidies and bailouts.

Nothing good comes from trying to appease a bully.

I get nothing but a travel advertising site.

linkjust.com says: Shorten URLs and earn money

It’s harvesting clicks for money, as far as I can see.

I’m not running your configuration so can’t tell you with the assurance that I have it working but Forwarding ports with firewalld appears to address port forwarding to rootless podman using firewalld. If that doesn’t work for you you might need to clarify what your firewalld configuration is that obscures the client IP. I wouldn’t expect a simple port mapping to affect IP address.

There are guides available. Search for ‘Linux kernel debugging’ or ‘Linux module debugging’, depending on which you are more interested in. And, of course, learn about the relevant parts of the kernel.

You might have a look at Debugging kernel and modules via gdb¶. The kernel.org site has a wealth of information.

What happened to “A rising tide lifts all boats”?

They may accept the ongoing cost, but that doesn’t make it free. There may be no cash payment, but that doesn’t make it free. Cost comes in many forms. The glib misrepresentation of the transaction is disappointing.

It’s not free.

On Debian 12 and 13 with xfce, I am using ibus and Intelligent Pinyin (ibus-libpinyin) for Chinese and English. In the past I have used fcitx5 and various other IMEs. Once they’re configured there isn’t much difference between ibus and fcitx5, for my simple use. My Chinese is rudimentary but my Chinese wife is happy with the configuration. I switch input methods with a configurable keyboard shortcut (Ctrl-Space is my preference) or menu on the ibus item in the Status Tray Plugin of the xfce panel. Changing is easy.

I have task-chinese-s-desktop and task-chinese-t-desktop installed. These bring in fcitx5 and various fonts, which suggests that whoever created these tasks think fcitx5 is better than ibus. And I installed ibus-libpinyin, which brings in ibus. I don’t recall why now - it was long ago. So I have ibus and fcitx5 installed but have been using only ibus for the past few years. It works well enough that I haven’t revisited it. If I were installing again now, I might choose fcitx5 instead of ibus.

I see there are also task-japanese-desktop and task-korean-desktop, which you might find helpful.

Actually, that makes a lot of sense…

Given that Trump is the best president ever (I’m sure I have heard people say so), then anyone who opposes him is, ipso facto, an enemy of the state and should be treated as such.

The more I think about it, the more obvious it is. I mean, why even have another election?

Pulsing the power every 3 to 5 seconds would be fantastic! One pulse every 30 seconds is not good. But I haven’t yet found a manual or sales person that can tell me the period of the pulse width modulation for any brand/model. Not that I have tried very hard.

Maybe I should try KitchenAid. What you describe sounds wonderful.

That was exactly the problem with simmering anything.

Also, only 9 power levels wasn’t enough. It was very powerful (nice when I wanted full power) but the steps in power were too big. For many things the only options were too hot or too cold.

But the fault that made me replace it was an intermittent one: occasionally (about five times in 18 months) it went to full power. This could happen at any power setting. No change in the indicated setting, but the power would come on continuously. Anything other than a pot of water would, in just a few seconds, be burning. Very dangerous! Fortunately, it never happened when I wasn’t standing right there to turn the power off at the wall switch. Being intermittent, technicians couldn’t find/fix the fault. It also occasionally stopped heating for a minute or so at a time, as if there was some thermal lockout even when nothing was unusually hot, but at least that wasn’t dangerous.

It was Haier. And I see they are no longer the biggest by revenue, but still #3

The problem with simmering is that the cooktop was very powerful (nice when you want to heat something quickly) but it only had two modes: one or off. The power was regulated by turning it on briefly, once every 30 seconds. Even at the lowest possible setting (there were 9 power levels), a pot of water would boil each time the power came on for about 3 seconds. Then it would cool for 27 seconds. Even a pot with a thick base, designed for induction cooktops, and heavy cast-iron pans had this problem.

It would be easy to turn the power on and off more frequently than once every 30 seconds. It wouldn’t be much more difficult to have a mode that delivered less than full power.

A thick iron plate under the pot smoothed the power delivery to the pot, but then it’s not really induction heating of the pot: just a hot plate.

Pancakes, steaks and simmering anything were my biggest frustrations.

It’s good to know there are some decent productions. That’s what I was expecting. I understand the technology. I know what is possible. It was very frustrating and disappointing. The largest appliance manufacturer in the world is selling poorly designed rubbish. The documentation doesn’t describe essential parameters. If only there were a practical way to distinguish the good from the bad before buying… try before you buy is my advice.

I had a terrible experience with one just last year. Had to replace it. Went back to an electric cooktop with simmerstats just last month. We’re much happier now. Can cook again without all the burning and boiling over.

I know an induction cooktop could be much better but the one we had couldn’t simmer anything: it could only intermittently overheat it. And occasionally it would switch to either full power (very dangerous - it was very powerful) or no power (absolutely ruins a steak when you’re trying to sear it). Technicians came multiple times and concluded ‘there’s nothing wrong’. Fortunately, after almost two years, they agreed to an ‘upgrade’.

I expect commercial induction cooktops are much better than consumer grade but they’re too expensive.

I wouldn’t buy another that I hadn’t tried first. I know one place that has a showroom with everything powered. Not that they would let me actually try cooking anything, but at least one can put a pot of water on and try out the controls.

I haven’t used 13/trixie but with 12/bookworm I use jmtpfs but it’s also available for trixie.

Thanks. I see that is in the linked article. My mistake was to read the article linked in the first paragraph: with the link text ‘restricted the approval’, thinking that was the details of the restriction.

According to the linked in the article, the restriction is a requirement to revise the warnings

WASHINGTON (AP) — The Food and Drug Administration said Wednesday it has expanded existing warnings on the two leading COVID-19 vaccines about a rare heart side effect mainly seen in young men.

In April, the FDA sent letters to both drugmakers asking them to update and expand the warnings to add more detail about the problem and to cover a larger group of patients.

I don’t see any indication that the vaccines are not approved other than that the accompanying documentation must be changed. The companies have now had several months to make the required changes.

The linked article suggests that the conduct of the FDA and resulting requirement to change the documentation was inappropriate. But there is no restriction other than the requirement to update the documentation. Or am I missing something in the article?

The headline says she won but the article says:

The bombshell allegation raises a serious question: Did Kamala Harris actually win the 2024 election?

Could Kamala Harris have actually won the election?

Compared with the body of the article, the headline is overstated. There are allegations of suspicious results and a court case going ahead to investigate, but that case is not yet decided.

“Kamala Harris may have won.”